1.  Volute casing, impeller and wear ring:

     Cast iron, Ductile iron, Cast steel, Stainless steel, Bronze, Duplex steel

2.  Shaft:

     Carbon steel, Stainless steel, Duplex steel

3.  Excellent material

    Selected domestic and international famous brand high quality bearing, 

    special designed mechanical seal, ensure lower noise and longer operation life. 

    Variable materials can be used in pump volute casing, impeller and shaft, so it's 

    suitable for different applications.

1. Volute Casing: 

Pumps generating high heads with dual volutes to reduce radial forces, ensuring minimal 

shaft deflection and low bearing loads.

2. Compact struction design:

Shorter distance between bearings, reduces the shaft bending moment, reinforce the shaft

rigidity, and increase the stability of the pump.

3. This pump uses the independent integral seal parts, solved the problem of hte dynamic

and stadic sealing.

4. The precise location pin allow the assemble the upper and lower volute casing easily.

1. The optimized hydraulic impeller designed based on CFD technology, can balance the 

axail and radical force automatically, and also ensure the high efficiency of the pump.

2. Compact construction, slight vabration and high pressure withstanding.

3. Both mechanical and soft packing seal can be used, meet more applications. The control

valve is used in the flushing pipe, which allows to adjust the flow in the flushing pipe anytime.

1. SBSL pump adopted the German hydraulic models, and redesigned on the CFD technology.

The pump can balance the axial and radical force automatically, and ensure the high efficiency 

of the pump. 

2. The new designed impeller reduces the flow pulsation, and increases the stability of the pump

performance.

3. Two different impellers can be used in the same model.  And through cuting the diameter of 

the impeller. A high efficient pump can be chose to meet any poin in the performance chart. And

it can also ensure the pump works with slight vibration at small flow rate, and not exceed the electric

current at big flow rate.

SBSL 100-310E

SBSL-- Vertical split case centrifugal pump

100 -- Normalized discharge flange (mm)

 310 -- Nomalized impeller diameter (mm)

    E --  Impeller type

SBSL pumps are widely used in water works, irrigation, drainage water station, power station,

industrial water supply, fire fighting and marine engineering. It's suitable for pumping clean

water or other liquids which chemical and physical property are similar to water.

Nominal Discharge Diameter: DN 80 ~ 800mm             

Qmax: 11160m3/h  

Hmax: 200m                     

Max operating Pressure: 2.5Mpa                        

Max working Temperature: 120℃